Contact Us:
West Coast: (310) 715-6600
East Coast: (772) 617-2282
a division of IMPAK Corporation
Shopping Cart

Swing Lid Double Chamber in Operation

Chamber Sealer Comparison - Vacuum With and Without Gas Flush

CHDC-530 Double Chamber Vacuum Sealer Machine

PRE-ORDER ITEM: AVAILABLE IN 4-6 WEEKS LEAD TIME

TECHNICAL SPECIFICATIONS

Chamber size30.0" x 23.0"
Chamber depth8/178mm
Distance between seal bars16.7/430mm
Seal bar length (A)21.2x4/540mm
Vacuum pump capacity40m3/h (2hp/2kw)
Voltage230V/3ph/60Hz/9amp
Machine weight657 lbs. /298 kg
Machine size - L x W x H58.0" x 34.0" x 44.0"
Standard Features:
  • Stainless Steel Construction
  • Flat chamber for easy cleaning
  • PD-01 Digital control panel
  • 10mm wide seals
  • Bladder activated sealing
  • Air Assist
  • High-density plastic filler plates
  • Pump overload warning indicator
  • Oil change indicator
  • Heavy-duty casters
  • Hide away control panel for easy wash down

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


OPTIONS:

  • PNC-01Computerized water resistant control panel
  • Single Phase motor available
  • Gas flush
  • Chamber height - 10.0"
  • Mechanical knife cut-off system
  • Automatic lid transfer
  • Voltage
  • Pump size
  • Gas flush
  • Air regulator
  • Mechanical knife cut-off
  • Top and bottom seal

Sterile Air

Two Pre-filters with PM indicators which remove contaminants and water from the compressed air line before they reach the nitrogen generator. After leaving the generator the air is pushed through a Post filter which results in a Sterile Nitrogen flow of 99.9999+% efficiency at 0.01 micron. This is essential for food and sensitive applications where purity is critical.

Nitrogen Generator Kit

The Nitrogen generator produces Nitrogen gas (N2) from a standard compressed air line. This model is designed to generate Nitrogen at purities between 95% and 99.5%.

The Nitrogen generator can be used as a replacement for heavy and bulky Nitrogen gas tanks. Its slick and compact design allows users to integrate this with their current gas flush enabled vacuum sealers without having to worry about it taking up too much space. Also, users will not have to worry about a depleting Nitrogen gas source, as our generator produces Nitrogen from a clean compressed air source.

OPTIONS:

  • PNC-01Computerized water resistant control panel
  • Single Phase motor available
  • Gas flush
  • Chamber height - 10.0"
  • Mechanical knife cut-off system
  • Automatic lid transfer
  • Voltage
  • Pump size
  • Gas flush
  • Air regulator
  • Mechanical knife cut-off
  • Top and bottom seal

NEED VACUUM BAGS? IMPAK recommends the 8.5" x 12.5" O.D. Vacuum Bags

NOTE: This item is also available in PALLET QUANTITIES (Pallet quantity = 38,500 bags)


PRE-ORDER ITEM: AVAILABLE IN 4-6 WEEKS LEAD TIME


Better known as the “workhorses” within the vacuum chamber industry, our double chamber line of equipment is built to handle years of heavy use and abuse. You will not find an aluminum deck on these machines because they are built to last. Consisting of a fully enclosed stainless steel base with a reinforced chamber deck and heavy-gauge lid, these machines are anything but light duty. Understanding the high demands set forth by the industry no corners were cut in the construction of our CHDC series of chamber machines.

We build a complete line of double chamber equipment with items that range from 21” seal bars to over 39” and span a wide variety of widths.

For additional protection and increased function, we fit our double chambers with our PNC-01 programmable water-resistant, IP56-rated control panel. Another feature that sets us apart is the quick disconnect seal bars that can be removed and installed in a matter of seconds. With these easy-to-disconnect seal bars, there is no need to wait for maintenance to show up with tools when a seal wire breaks. By simply having a spare bar on hand, you can be back up and running in under a minute without any special tools. Learn more about the PD-01 and PNC-01 Microprocessor System.

Time is money in heavy usage applications and we have taken this into account when designing our double chamber machines. Easily removable cushion bars and spacer boards make cleaning the deck surface fast and efficient. Our spring design that assists in lifting the lid provides a smooth and easy back and forth movement that operators will love.

All IMPAK vacuum chamber models are guaranteed to meet the standards of ETL, UL and NSF.

In order to be the best we believe in using the best, and that is why Busch vacuum pumps come standard in all of our double-chamber machines. Find out for yourself what thousands of others around the world have known for years; choose IMPAK for your future vacuum packaging needs.

OPTIONS:

  • PD-01 Basic Digital Control Panel
  • Single Phase motor available
  • Gas flush
  • Chamber height - 10.0"
  • Mechanical knife cut-off system
  • Automatic lid transfer
  • Voltage
  • Pump size
  • Gas flush
  • Air regulator
  • Mechanical knife cut-off
  • Top and bottom seal
For options, please contact sales@sorbentsystems.com

CHDC-530: Double Chamber Vacuum Sealer (PRE-ORDER)

  • $10,820.00


Available Options